Beam 750 Motor
$148.00
MT:0039-Beam 750
Please Make Sure to
Double-check the Motor Number Before you Purchase.
Double-check the Motor Number Before you Purchase.
If you are Not Sure if this Motor Will Fit Your Unit,
Please Call
Please Call
1-800-322-2965 Before you Purchase.
Motors are Non-Refundable
The Beam 750 Central Vacuum Motor is a replacement motor designed to help restore reliable suction and cleaning performance to compatible Beam 750 central vacuum systems. If your Beam 750 motor is worn, noisy, overheating, or no longer running, replacing the motor can be a cost-effective alternative to replacing the entire central vacuum power unit. Keep your built-in vacuum system operating efficiently with a quality replacement motor from ThinkVacuums.
Attention Consumer
Ametek-Lamb recommends replacing your carbon brushes and motor gaskets routinely to prolong the life of your new motor. Stock up now, have your supplies on hand.
Easy Ordering
As Simple As 1-2-3
As Simple As 1-2-3
1SELECT PRODUCT OPTIONS
Keep your Beam 750 central vacuum operating at its best with a quality replacement motor from ThinkVacuums. The motor is one of the most important components of a central vacuum power unit, providing the suction necessary to move dirt, dust, pet hair, and debris through your home's tubing system. When the motor begins to wear out or fails completely, replacing the motor can be a practical and economical way to restore your central vacuum system.
The Beam 750 central vacuum motor is designed as a replacement for compatible Beam 750 central vacuum systems. Whether you're repairing an older central vacuum or replacing a motor that has reached the end of its service life, installing the correct replacement motor can help restore dependable suction and cleaning performance.
Replace Your Beam 750 Central Vacuum Motor
Central vacuum motors experience normal wear over time. Years of regular use can eventually result in reduced performance, excessive noise, overheating, or complete motor failure. When these problems occur, replacing the motor may allow you to continue using your existing Beam 750 power unit rather than purchasing an entirely new central vacuum system.
A replacement motor can be especially useful when the collection canister, filtration system, electrical components, and housing of your Beam 750 remain in good condition. Repairing the motor can extend the central vacuum's useful life and keep your existing home installation working.
Signs Your Beam 750 Motor May Need Replacement
Not sure whether your Beam 750 central vacuum motor needs replacing? Common warning signs include:
- Reduced suction: Your central vacuum no longer provides the cleaning power it once did.
- Unusual motor noise: Loud, grinding, rattling, or squealing sounds may indicate motor wear.
- Overheating: A motor that becomes excessively hot or shuts down during use may be nearing failure.
- Burning smell: An unusual electrical or burning odor can indicate a motor or electrical problem.
- Motor will not start: A complete loss of motor operation may indicate the need for replacement.
- Intermittent operation: A motor that starts and stops unexpectedly should be inspected before continued use.
If your Beam 750 is experiencing these symptoms, inspect the complete central vacuum system before replacing the motor. Clogged tubing, filters, bags, hoses, electrical connections, and other components can also affect vacuum performance.
Quality Replacement Motor for Beam Central Vacuum Systems
Choosing the correct replacement motor is important for maintaining the performance and safety of your central vacuum. Motors can vary by voltage, fan diameter, stages, mounting configuration, airflow, and electrical connections. Always compare the specifications and part number of your existing motor before ordering.
A properly matched Beam 750 replacement motor can provide the dependable power needed to operate your central vacuum system and maintain effective airflow through the home's installed tubing.
Why Replace the Motor Instead of the Entire Central Vacuum?
One of the benefits of a built-in central vacuum system is that individual components can often be repaired or replaced. If the motor in your Beam 750 has failed but the rest of the power unit is still in good condition, replacing the motor may be significantly less expensive than replacing the complete central vacuum system.
A motor replacement can help:
- Restore suction and cleaning performance
- Extend the life of your existing Beam 750 system
- Reduce the cost of a central vacuum repair
- Keep your existing tubing and inlet installation
- Avoid replacing a complete power unit unnecessarily
Beam 750 Central Vacuum Replacement Parts
ThinkVacuums offers replacement parts and accessories for many central vacuum systems. When repairing a Beam 750, it is important to identify the exact motor required for your specific power unit.
Before purchasing a Beam 750 central vacuum motor, compare its part number, voltage, fan configuration, mounting style, and electrical connections to your existing motor. If you're unsure which replacement motor you need, contact ThinkVacuums for assistance with identifying the correct part.
Shop Beam 750 Central Vacuum Motors
If you're searching for a Beam 750 central vacuum motor, a Beam 750 replacement motor, a Beam vacuum motor, or a central vacuum replacement motor, ThinkVacuums can help you find the right replacement for your system.
Replacing a worn or failed motor can be an economical way to restore your Beam 750 central vacuum and extend the life of your existing built-in vacuum system. Always verify compatibility before ordering to ensure the replacement motor is compatible with your Beam 750 power unit.
| Replacement Part Type | Motors |
|---|---|
| Voltage | 120 |
| Carbon Brush | 33423-22 |
| Motor Stages | 2 |
| Motor Speeds | 1 |
| Motor Type | Series Universal |
| Motor Frequency | 50/60Hz |
| Motor Fan Diameter | 5.700 |
| Fan System Style | Bypass |
| Air Discharge | Tangential |
| Motor Low Temp | 32.000 |
| Motor High Temp | 104.000 |
| Motor Bearing | Ball |
| Motor Comm Bracket Material | Aluminum |
| Motor Fan Bracket Material | Aluminum |
| Motor Insulation Class | A |
| Motor Fan Shell Coat | none |
| Motor Duty Cycle | Intermittent |
| Motor Electrical Connection | Lead Wires |
| Weight (lbs) | 9.000000 |
Product Description
Product Specifications
Download Instructions
Product Videos
Product Reviews
Read about the 119631 Ametek Lamb Motor
Keep your Beam 750 central vacuum operating at its best with a quality replacement motor from ThinkVacuums. The motor is one of the most important components of a central vacuum power unit, providing the suction necessary to move dirt, dust, pet hair, and debris through your home's tubing system. When the motor begins to wear out or fails completely, replacing the motor can be a practical and economical way to restore your central vacuum system.
The Beam 750 central vacuum motor is designed as a replacement for compatible Beam 750 central vacuum systems. Whether you're repairing an older central vacuum or replacing a motor that has reached the end of its service life, installing the correct replacement motor can help restore dependable suction and cleaning performance.
Replace Your Beam 750 Central Vacuum Motor
Central vacuum motors experience normal wear over time. Years of regular use can eventually result in reduced performance, excessive noise, overheating, or complete motor failure. When these problems occur, replacing the motor may allow you to continue using your existing Beam 750 power unit rather than purchasing an entirely new central vacuum system.
A replacement motor can be especially useful when the collection canister, filtration system, electrical components, and housing of your Beam 750 remain in good condition. Repairing the motor can extend the central vacuum's useful life and keep your existing home installation working.
Signs Your Beam 750 Motor May Need Replacement
Not sure whether your Beam 750 central vacuum motor needs replacing? Common warning signs include:
- Reduced suction: Your central vacuum no longer provides the cleaning power it once did.
- Unusual motor noise: Loud, grinding, rattling, or squealing sounds may indicate motor wear.
- Overheating: A motor that becomes excessively hot or shuts down during use may be nearing failure.
- Burning smell: An unusual electrical or burning odor can indicate a motor or electrical problem.
- Motor will not start: A complete loss of motor operation may indicate the need for replacement.
- Intermittent operation: A motor that starts and stops unexpectedly should be inspected before continued use.
If your Beam 750 is experiencing these symptoms, inspect the complete central vacuum system before replacing the motor. Clogged tubing, filters, bags, hoses, electrical connections, and other components can also affect vacuum performance.
Quality Replacement Motor for Beam Central Vacuum Systems
Choosing the correct replacement motor is important for maintaining the performance and safety of your central vacuum. Motors can vary by voltage, fan diameter, stages, mounting configuration, airflow, and electrical connections. Always compare the specifications and part number of your existing motor before ordering.
A properly matched Beam 750 replacement motor can provide the dependable power needed to operate your central vacuum system and maintain effective airflow through the home's installed tubing.
Why Replace the Motor Instead of the Entire Central Vacuum?
One of the benefits of a built-in central vacuum system is that individual components can often be repaired or replaced. If the motor in your Beam 750 has failed but the rest of the power unit is still in good condition, replacing the motor may be significantly less expensive than replacing the complete central vacuum system.
A motor replacement can help:
- Restore suction and cleaning performance
- Extend the life of your existing Beam 750 system
- Reduce the cost of a central vacuum repair
- Keep your existing tubing and inlet installation
- Avoid replacing a complete power unit unnecessarily
Beam 750 Central Vacuum Replacement Parts
ThinkVacuums offers replacement parts and accessories for many central vacuum systems. When repairing a Beam 750, it is important to identify the exact motor required for your specific power unit.
Before purchasing a Beam 750 central vacuum motor, compare its part number, voltage, fan configuration, mounting style, and electrical connections to your existing motor. If you're unsure which replacement motor you need, contact ThinkVacuums for assistance with identifying the correct part.
Shop Beam 750 Central Vacuum Motors
If you're searching for a Beam 750 central vacuum motor, a Beam 750 replacement motor, a Beam vacuum motor, or a central vacuum replacement motor, ThinkVacuums can help you find the right replacement for your system.
Replacing a worn or failed motor can be an economical way to restore your Beam 750 central vacuum and extend the life of your existing built-in vacuum system. Always verify compatibility before ordering to ensure the replacement motor is compatible with your Beam 750 power unit.
-
-20%
FlipBUS Central Vacuum Cleaning Balls
Was $62.75
Save $12.80 (20%) through 08/14/2026
Save: 20%
On Sale: $49.95
Save $12.80 through 08/14/2026$49.95
-
-10%
Tornado Power Central Vacuum Maintenance Cloths
Was $29.95
Save $3.00 (10%) through 08/14/2026
Save: 10%
On Sale: $26.95
Save $3.00 through 08/14/2026$26.95
Log In
Create New Account