Central Vacuum Utility Kit
PRICE AS CONFIGURED $15.95
Compatible with the following Brands & Models
(hover over each)
- Aggresor Please Call
- AirVac Please Call
- Astrovac Please Call
- Beam Please Call
- Black & Decker Please Call
- Broan Please Call
- Brute Please Call
- Budd Please Call
- Cana-Vac Please Call
- Centralux Please Call
- Cirrus Please Call
- CV International Please Call
- Dirt Devil Please Call
- DrainVac Please Call
- DuoVac Please Call
- DustCare Please Call
- Easy-Flo Please Call
- Electrolux Please Call
- Eureka Please Call
- Fasco Please Call
- Filtex Please Call
- Fridgidaire Please Call
- Hayden Please Call
- HoneyWell Please Call
- Hoover Please Call
- Imperium Please Call
- Kenmore Please Call
- MD Please Call
- Nadair Please Call
- NuTone Please Call
- Patton Please Call
- PowerStar Please Call
- Pullman-Holt Please Call
- PurVac Please Call
- Riccar Please Call
- Royal Please Call
- Sequoia Please Call
- Signature Please Call
- Simplicity Please Call
- Smart Please Call
- VacuFlow Please Call
- VacuMaid Please Call
- Valet Please Call
- Vent-A-Vac Please Call
- Walvac Please Call
- Whirlpool Please Call
- Zenex Please Call
Ordering
Any installation procedure becomes a lot easier when all the necessary items are at hand. This central vacuum utility inlet kit responds to the needs of central vacuum users by integrating three fittings of significant importance to the layout of a well-organized and efficient piping system. Consisting of a utility inlet, a three-way tee fitting and, last but not least, a low voltage wire, this kit is intended for users of standard vacuum fittings designed for standard two-inch tubing.
The inlet included in this central vacuum utility inlet kit has two low-voltage contact points for use with hoses featuring an on/off function. In order for these to become active, the low-voltage wire must be connected to the low-voltage leads located at the level of the central vacuum unit. Usually mounted in the vicinity of the central vacuum unit wherever the pipe is visible for the abovementioned reason, the top locations where such utility valves are installed are utility rooms and garage areas. These coincide with the most commonly preferred locations for the installation of 90-Degree Sweep T, utility inlets being designed to fit into them. Such a sweep tee fitting is also included in this central vacuum utility inlet kit for additional convenience.
The utility inlet provided with this kit can also be used to seal standard sized pipes. However, this application does not require the use of a low-voltage wire or a sweep tee fitting, so it can be acquired separately.
ThinkVacuums offers pipe fittings, central vacuum systems, parts, and more. If you need help installing your central vacum call us today: 1.800.322.2965.
Read about the Utility Central Vacuum Kit
Any installation procedure becomes a lot easier when all the necessary items are at hand. This central vacuum utility inlet kit responds to the needs of central vacuum users by integrating three fittings of significant importance to the layout of a well-organized and efficient piping system. Consisting of a utility inlet, a three-way tee fitting and, last but not least, a low voltage wire, this kit is intended for users of standard vacuum fittings designed for standard two-inch tubing.
The inlet included in this central vacuum utility inlet kit has two low-voltage contact points for use with hoses featuring an on/off function. In order for these to become active, the low-voltage wire must be connected to the low-voltage leads located at the level of the central vacuum unit. Usually mounted in the vicinity of the central vacuum unit wherever the pipe is visible for the abovementioned reason, the top locations where such utility valves are installed are utility rooms and garage areas. These coincide with the most commonly preferred locations for the installation of 90-Degree Sweep T, utility inlets being designed to fit into them. Such a sweep tee fitting is also included in this central vacuum utility inlet kit for additional convenience.
The utility inlet provided with this kit can also be used to seal standard sized pipes. However, this application does not require the use of a low-voltage wire or a sweep tee fitting, so it can be acquired separately.
ThinkVacuums offers pipe fittings, central vacuum systems, parts, and more. If you need help installing your central vacum call us today: 1.800.322.2965.
Log In
Create New Account