Hide a Hose system, also referred to as Intelligent Vacuuming System, is a future's technology that is already in use in homes and skyscrapers/ 

It is an upgraded central vacuum system that streamlines cleaning thanks to easy access to the unit and provides excellent efficiency and order.  

Intelligent Vacuuming Systems comprises central vacuuming systems and hose stored inside walls that can be even fifteen-meter long. In comparison to conventional vacuums, this solution boosts the comfort and efficiency of vacuuming.

During the hide a hose power unit installation process, it is vital to take care of the precision of the entire project; its quality impacts correct suction power and quality of the hose hiding system. Therefore, it's vital to take care of the installation procedure the right way and also to use correct parts and elements, so that system's efficiency can guarantee you full vacuuming comfort.

If Hide A Hose system is installed wrongly, it can worsen the ease of use of the entire system. That's why it's essential to plan the installation process. Here are the most crucial points required to be remembered to utilize the system with its full benefits.

Vacuuming hose connection (inlet)

Usually, placing one inlet on each floor is sufficient. Massive properties are an exception, where we might need to use hose longer than 12m; in cases like those, we suggest using additional inlets with shorter hoses, which are easier to use.  

It's worth noticing that Hide A Hose mini inlet is pretty deep, so it needs a deep slot in the wall. That's why we should try to put it on the full-thickness block, or, in case of thin room dividers, back it with plasterboard. You can also pull in plaster and mesh it on the other side. You should have the last inlet even when you just have begun the installation procedure - it will perfectly fit the plate and perfect mounting of the inlet. If you are installing without an inlet, you risk that even with minimal imprecision, it will become hard to mount the inlet when you get to the installation procedures' final stage. In other words - a mistake at this stage of the installation may make you repeat some sections of the installation procedure. 

Installation And Of The System, Or "Less Is More."

Before laying down the hide a hose installation, we should plan it so the number of bends will be less. In the hose hiding section, there should be no more than three long nineties. It makes an impact on comfortable and lighthouse drawing. That is quite important; we've heard of cases where unprofessional assembly workers placed the system in such a way that hose drawing was utterly uncomfortable.

If you plan a central vacuum installation in an earlier enough stage of the procedure, it shouldn't be a problem not only to permit the number of bends to three but even to use only two bends. Relevant: in the section where the hose will be hidden, it's forbidden to use bends from regular systems and to create splits. Moreover, it's needed to lengthen the hose section by ten percent, and after this section, you can use standard parts or dustpan

The core of the system - which suction unit to choose?

Picking a central vacuum for Hide A Hose systems from hide hose dealers is entirely different for conventional systems.  From a distance: we do not base our decision in any way on conventional system needs. The vacuum must be robust for these systems, equipped with a strong engine that will create high negative pressure. Besides that, if you plan on using a hose that is longer than 9 meters (and in more complex systems), we advise choosing a double-engine unit.

 

It should be noted by anyone planning Hide A Hose system that there shouldn't be any comprises when picking a suction unit. Vacuuming power, which is the most vital trait of the system, comes from a professionally mounted system and choosing the right, powerful central unit. This unit should be equipped with an engine that is powerful and high durability and quality - that will stand heavy workload for years without a problem. That's why it's vital to ask what turbines the unit has because its convenience comes from its power, and there are many affordable turbines on the market. 

In essence: you pay only once for quality. For its lack - two times or more.

Those who do a Hide A Hose DIY installation stand before seemingly simple questions at the beginning of the process: which brand and what price? Lack of information about differences between hide a hose power units central units can lead to picking a cheaper one. According to the manuals, meet technical needs for the installation process.