Vacuflo 260 Motor
$218.00
MT:0081-Vacuflo 260
Please Make Sure to
Double-check the Motor Number Before you Purchase.
Double-check the Motor Number Before you Purchase.
If you are Not Sure if this Motor Will Fit Your Unit,
Please Call
Please Call
1-800-322-2965 Before you Purchase.
Motors are Non-Refundable
The Ametek Lamb 122159-07 is an upgraded replacement motor for the VACUFLO 260 central vacuum system. This genuine 120V, 2-stage tangential bypass motor delivers approximately 116 CFM, 112 inches of waterlift, and 443 Air Watts. The 122159-07 features updated fan blades designed to help reduce debris buildup and includes the upgraded 17-amp circuit protection required for the higher motor load.
Attention Consumer
Ametek-Lamb recommends replacing your carbon brushes and motor gaskets routinely to prolong the life of your new motor. Stock up now, have your supplies on hand.
Easy Ordering
As Simple As 1-2-3
As Simple As 1-2-3
1SELECT PRODUCT OPTIONS
Restore your VACUFLO 260 central vacuum's suction and performance with the upgraded Ametek Lamb 122159-07 replacement motor. Designed for compatible VACUFLO True Cyclonic systems, this genuine Ametek Lamb motor provides strong airflow and vacuum power while offering an updated design over the original motor used in older VACUFLO 260 systems.
The VACUFLO 260 is a True Cyclonic central vacuum system designed to operate without conventional disposable bags or filters. The system uses cyclonic separation to remove dirt and debris from the incoming airflow. VACUFLO's official product documentation identifies the 260 as one of its True Cyclonic power units.
The 122159-07 is a 120-volt, 2-stage, 5.7-inch tangential bypass motor. Published specifications list approximately 116 CFM, 112 inches of waterlift, and 443 Air Watts.
Upgraded Replacement for VACUFLO 260
The 122159-07 is sold as an upgraded replacement motor for the VACUFLO 260, as well as the VACUFLO 460 and 760. The 760 uses two motors. The updated -07 version features redesigned fan blades intended to make it less likely for dirt to become caught within the fan.
Because the upgraded motor has a higher electrical load, replacement installations may require the 17-amp circuit breaker/protector supplied for the upgrade. Do not retain the original 15-amp breaker when the upgrade requires 17-amp protection.
Strong Central Vacuum Performance
With approximately 443 Air Watts, 116 CFM of airflow, and 112 inches of waterlift, the 122159-07 provides the performance needed to restore a compatible VACUFLO 260 system. The 5.7-inch, 2-stage motor uses a tangential bypass discharge that directs exhaust air away from the motor's electrical components.
Replacing a worn motor can be an economical alternative to replacing the complete power unit when the existing VACUFLO tank, wiring, relay or circuit board, and other components are still in good condition.
Key Features
- Genuine Ametek Lamb 122159-07 replacement motor
- Designed for compatible VACUFLO 260 systems
- Also fits select VACUFLO 460 and 760 systems
- 120-volt motor
- Powerful 2-stage design
- 5.7-inch fan diameter
- Tangential bypass discharge
- Approximately 443 Air Watts
- Approximately 116 CFM
- Approximately 112 inches of waterlift
- Updated fan blade design
- Helps reduce the chance of debris becoming trapped in the fan
- Uses 33505-1 carbon brushes
- Upgraded motor for select older VACUFLO systems
- VACUFLO 760 requires two motors
VACUFLO 260 Motor Compatibility
The Ametek Lamb 122159-07 is commonly listed as a replacement for:
- VACUFLO 260
- VACUFLO 460
- VACUFLO 760
The VACUFLO 760 requires two motors.
Important Compatibility Information
The VACUFLO 260 has been produced over multiple generations, and older units may have different motor numbers. Cross-reference information identifies 116472 with VACUFLO 260/460/760, while current replacement listings identify the 122159-07 as an upgraded replacement.
For that reason, customers should verify the motor number and physical configuration of their existing motor before ordering.
| Replacement Part Type | Motors |
|---|---|
| Voltage | 120 |
| Carbon Brush | 33505-1 |
| Motor Stages | 2 |
| Motor Fan Diameter | 5.7 |
| Air Discharge | Bypass Tangential |
| Motor Bearing | Double Ball Bearings |
| Weight (lbs) | 9.000000 |
Product Description
Product Specifications
Product Videos
Product Reviews
Read about the 122159 Ametek Lamb Motor
Restore your VACUFLO 260 central vacuum's suction and performance with the upgraded Ametek Lamb 122159-07 replacement motor. Designed for compatible VACUFLO True Cyclonic systems, this genuine Ametek Lamb motor provides strong airflow and vacuum power while offering an updated design over the original motor used in older VACUFLO 260 systems.
The VACUFLO 260 is a True Cyclonic central vacuum system designed to operate without conventional disposable bags or filters. The system uses cyclonic separation to remove dirt and debris from the incoming airflow. VACUFLO's official product documentation identifies the 260 as one of its True Cyclonic power units.
The 122159-07 is a 120-volt, 2-stage, 5.7-inch tangential bypass motor. Published specifications list approximately 116 CFM, 112 inches of waterlift, and 443 Air Watts.
Upgraded Replacement for VACUFLO 260
The 122159-07 is sold as an upgraded replacement motor for the VACUFLO 260, as well as the VACUFLO 460 and 760. The 760 uses two motors. The updated -07 version features redesigned fan blades intended to make it less likely for dirt to become caught within the fan.
Because the upgraded motor has a higher electrical load, replacement installations may require the 17-amp circuit breaker/protector supplied for the upgrade. Do not retain the original 15-amp breaker when the upgrade requires 17-amp protection.
Strong Central Vacuum Performance
With approximately 443 Air Watts, 116 CFM of airflow, and 112 inches of waterlift, the 122159-07 provides the performance needed to restore a compatible VACUFLO 260 system. The 5.7-inch, 2-stage motor uses a tangential bypass discharge that directs exhaust air away from the motor's electrical components.
Replacing a worn motor can be an economical alternative to replacing the complete power unit when the existing VACUFLO tank, wiring, relay or circuit board, and other components are still in good condition.
Key Features
- Genuine Ametek Lamb 122159-07 replacement motor
- Designed for compatible VACUFLO 260 systems
- Also fits select VACUFLO 460 and 760 systems
- 120-volt motor
- Powerful 2-stage design
- 5.7-inch fan diameter
- Tangential bypass discharge
- Approximately 443 Air Watts
- Approximately 116 CFM
- Approximately 112 inches of waterlift
- Updated fan blade design
- Helps reduce the chance of debris becoming trapped in the fan
- Uses 33505-1 carbon brushes
- Upgraded motor for select older VACUFLO systems
- VACUFLO 760 requires two motors
VACUFLO 260 Motor Compatibility
The Ametek Lamb 122159-07 is commonly listed as a replacement for:
- VACUFLO 260
- VACUFLO 460
- VACUFLO 760
The VACUFLO 760 requires two motors.
Important Compatibility Information
The VACUFLO 260 has been produced over multiple generations, and older units may have different motor numbers. Cross-reference information identifies 116472 with VACUFLO 260/460/760, while current replacement listings identify the 122159-07 as an upgraded replacement.
For that reason, customers should verify the motor number and physical configuration of their existing motor before ordering.
-
-20%
FlipBUS Central Vacuum Cleaning Balls
Was $62.75
Save $12.80 (20%) through 09/04/2026
Save: 20%
On Sale: $49.95
Save $12.80 through 09/04/2026$49.95
-
-10%
Tornado Power Central Vacuum Maintenance Cloths
Was $29.95
Save $3.00 (10%) through 09/04/2026
Save: 10%
On Sale: $26.95
Save $3.00 through 09/04/2026$26.95
Log In
Create New Account