Vacuflo FC550 Motor
$207.00
MT:0085-Vacuflo FC550
Please Make Sure to
Double-check the Motor Number Before you Purchase.
Double-check the Motor Number Before you Purchase.
If you are Not Sure if this Motor Will Fit Your Unit,
Please Call
Please Call
1-800-322-2965 Before you Purchase.
Motors are Non-Refundable
The Ametek Lamb 119913-07 is a genuine replacement motor for the VACUFLO FC550 central vacuum system. This 120V, 2-stage, 5.7-inch tangential bypass motor provides strong airflow and suction for compatible VACUFLO FC550 power units. The 119913-07 is also used in select Dirt Devil and Royal central vacuum systems.
Attention Consumer
Ametek-Lamb recommends replacing your carbon brushes and motor gaskets routinely to prolong the life of your new motor. Stock up now, have your supplies on hand.
Easy Ordering
As Simple As 1-2-3
As Simple As 1-2-3
1SELECT PRODUCT OPTIONS
VACUFLO FC550 Replacement Motor – Ametek Lamb 119913-07
Restore the suction and cleaning performance of your VACUFLO FC550 central vacuum with the genuine Ametek Lamb 119913-07 replacement motor.
The VACUFLO FC550 is a filtered cyclonic central vacuum system designed for homes up to approximately 5,000 square feet. VACUFLO's specifications list the FC550 at approximately 121 CFM, 125 inches of waterlift, and 520 maximum Air Watts, with a 120-volt electrical system.
The replacement motor used for the FC550 is the Ametek Lamb 119913-07. It features a 2-stage, 5.7-inch tangential bypass design and provides strong airflow while directing exhaust air away from the motor's electrical components. ThinkVacuums specifically identifies the 119913-07 as fitting the VACUFLO FC550.
Genuine Ametek Lamb 119913-07 Motor
The Ametek Lamb 119913-07 is a widely used central vacuum motor designed for residential and commercial vacuum applications. Its tangential bypass configuration separates the motor's cooling airflow from the vacuumed air, helping protect the motor from dirt and debris passing through the vacuum system.
The motor is commonly used as a replacement for:
- VACUFLO FC550
- VACUFLO FC550-C
- Dirt Devil 2200
- Dirt Devil Pro 690
- Royal CS620
- Other compatible central vacuum applications
Strong Performance for the VACUFLO FC550
The 119913-07 is a 120V, 2-stage motor with a 5.7-inch fan. Current published specifications for this motor list approximately 121 CFM, 125 inches of waterlift, and 493 Air Watts, while VACUFLO's complete FC550 system is rated at up to 520 maximum Air Watts.
Because motor specifications can be published differently depending on the test method and whether the rating refers to the motor or the complete power unit, do not confuse the motor's published specifications with the overall FC550 system specifications.
Key Features
- Genuine Ametek Lamb 119913-07 replacement motor
- Designed for the VACUFLO FC550
- Compatible with VACUFLO FC550-C
- 120V operation
- 2-stage motor design
- 5.7-inch fan diameter
- Tangential bypass discharge
- Approximately 121 CFM
- Approximately 125 inches of waterlift
- Approximately 493 Air Watts
- Uses 33505-1 carbon brushes
- Suitable for residential and commercial central vacuum applications
- Direct replacement motor for compatible FC550 systems
VACUFLO FC550 Compatibility
The Ametek Lamb 119913-07 is listed as the replacement motor for:
VACUFLO
- FC550
- FC550-C
Other Compatible Applications
- Dirt Devil 2200
- Dirt Devil Pro 690
- Royal CS620
Important Compatibility Notice
Always check the motor number printed on your existing motor before purchasing.
Central vacuum motors can look nearly identical while having different electrical specifications, mounting arrangements, fan configurations, and performance characteristics.
If your existing VACUFLO FC550 motor doesn't have the same motor number, or you are unsure about compatibility, verify the motor before ordering.
| Replacement Part Type | Motors |
|---|---|
| Voltage | 120 |
| Carbon Brush | 33505-1 |
| Motor Speeds | 2 |
| Motor Fan Diameter | 5.7 |
| Air Discharge | Bypass Tangential |
| Motor Comm Bracket Material | Thermoset |
| Motor Fan Bracket Material | Thermoset |
| Weight (lbs) | 9.000000 |
Product Description
Product Specifications
Product Videos
Product Reviews
Read about the 119913-07 Ametek Lamb Motor
VACUFLO FC550 Replacement Motor – Ametek Lamb 119913-07
Restore the suction and cleaning performance of your VACUFLO FC550 central vacuum with the genuine Ametek Lamb 119913-07 replacement motor.
The VACUFLO FC550 is a filtered cyclonic central vacuum system designed for homes up to approximately 5,000 square feet. VACUFLO's specifications list the FC550 at approximately 121 CFM, 125 inches of waterlift, and 520 maximum Air Watts, with a 120-volt electrical system.
The replacement motor used for the FC550 is the Ametek Lamb 119913-07. It features a 2-stage, 5.7-inch tangential bypass design and provides strong airflow while directing exhaust air away from the motor's electrical components. ThinkVacuums specifically identifies the 119913-07 as fitting the VACUFLO FC550.
Genuine Ametek Lamb 119913-07 Motor
The Ametek Lamb 119913-07 is a widely used central vacuum motor designed for residential and commercial vacuum applications. Its tangential bypass configuration separates the motor's cooling airflow from the vacuumed air, helping protect the motor from dirt and debris passing through the vacuum system.
The motor is commonly used as a replacement for:
- VACUFLO FC550
- VACUFLO FC550-C
- Dirt Devil 2200
- Dirt Devil Pro 690
- Royal CS620
- Other compatible central vacuum applications
Strong Performance for the VACUFLO FC550
The 119913-07 is a 120V, 2-stage motor with a 5.7-inch fan. Current published specifications for this motor list approximately 121 CFM, 125 inches of waterlift, and 493 Air Watts, while VACUFLO's complete FC550 system is rated at up to 520 maximum Air Watts.
Because motor specifications can be published differently depending on the test method and whether the rating refers to the motor or the complete power unit, do not confuse the motor's published specifications with the overall FC550 system specifications.
Key Features
- Genuine Ametek Lamb 119913-07 replacement motor
- Designed for the VACUFLO FC550
- Compatible with VACUFLO FC550-C
- 120V operation
- 2-stage motor design
- 5.7-inch fan diameter
- Tangential bypass discharge
- Approximately 121 CFM
- Approximately 125 inches of waterlift
- Approximately 493 Air Watts
- Uses 33505-1 carbon brushes
- Suitable for residential and commercial central vacuum applications
- Direct replacement motor for compatible FC550 systems
VACUFLO FC550 Compatibility
The Ametek Lamb 119913-07 is listed as the replacement motor for:
VACUFLO
- FC550
- FC550-C
Other Compatible Applications
- Dirt Devil 2200
- Dirt Devil Pro 690
- Royal CS620
Important Compatibility Notice
Always check the motor number printed on your existing motor before purchasing.
Central vacuum motors can look nearly identical while having different electrical specifications, mounting arrangements, fan configurations, and performance characteristics.
If your existing VACUFLO FC550 motor doesn't have the same motor number, or you are unsure about compatibility, verify the motor before ordering.
-
-20%
FlipBUS Central Vacuum Cleaning Balls
Was $62.75
Save $12.80 (20%) through 09/04/2026
Save: 20%
On Sale: $49.95
Save $12.80 through 09/04/2026$49.95
-
-10%
Tornado Power Central Vacuum Maintenance Cloths
Was $29.95
Save $3.00 (10%) through 09/04/2026
Save: 10%
On Sale: $26.95
Save $3.00 through 09/04/2026$26.95
Log In
Create New Account