Universal 020017 Utility Inlet Valve (With Screws)
Was $13.95
Save $2.00 (14%) through 12/06/2024
Save: 14%
$11.95
Was $13.95
Save $2.00 (14%) through 12/06/2024
Save: 14%
$11.95
Compatible with the following Brands & Models
(hover over each)
- Aggresor Please Call
- AirVac Please Call
- Astrovac Please Call
- Beam Please Call
- Black & Decker Please Call
- Broan Please Call
- Brute Please Call
- Budd Please Call
- Cana-Vac Please Call
- Centralux Please Call
- Cirrus Please Call
- CV International Please Call
- Dirt Devil Please Call
- DrainVac Please Call
- DuoVac Please Call
- DustCare Please Call
- Easy-Flo Please Call
- Electrolux Please Call
- Eureka Please Call
- Fasco Please Call
- Filtex Please Call
- Fridgidaire Please Call
- Hayden Please Call
- HoneyWell Please Call
- Hoover Please Call
- Imperium Please Call
- Kenmore Please Call
- MD Please Call
- Nadair Please Call
- NuTone Please Call
- Patton Please Call
- PowerStar Please Call
- Pullman-Holt Please Call
- PurVac Please Call
- Riccar Please Call
- Royal Please Call
- Sequoia Please Call
- Signature Please Call
- Simplicity Please Call
- Smart Please Call
- VacuFlow Please Call
- VacuMaid Please Call
- Valet Please Call
- Vent-A-Vac Please Call
- Walvac Please Call
- Whirlpool Please Call
- Zenex Please Call
Automatic On/Off
Snap Back Protective Cover
Install Directly into Exposed Piping
No Need For Brackets or Mounting Plates
Dimensions: 2 1/2" W x 2 7/8" H x 1 7/8" D
Ordering
Low-voltage inlets are currently the most common type of valves used with central vacuum systems, mainly on account of their increased practicality and convenience. This central vacuum utility inlet belongs to the same category, so it constitutes a viable option for users of central vacuum systems.
In terms of size, this low-voltage utility inlet is designed to fit elbows and fittings with a standard 2-inch inside diameter. As far as its technical particularities are concerned, it features low-voltage contact points which allow its use with hoses equipped with on/off switch buttons. These are enabled upon the connection of the low-voltage wire to the low-voltage leads on the central vacuum unit. It should also be noted that, similarly to other utility inlet valves, this central vacuum utility inlet is designed to fit into a sweep T fitting, often being mounted in the proximity of the central vacuum unit, more precisely at locations where the pipe is uncovered. Sweep T fittings are commonly encountered in utility rooms, garages, basements and workshops, so these are also the most common locations where low-voltage utility inlet valves can be found.
Finally, this central vacuum utility inlet can also be fitted on PVC pipes as a seal and therefore as a substitute for a proper pipe cap fitting, whether to stop any pipe run extensions or prevent various objects from reaching into the pipe. This additional function only serves to further prove the increased practicality and the high convenience levels this component provides.
ThinkVacuums offers pipe fittings, central vacuum systems, parts, and more. If you need help installing your central vacum call us today: 1.800.322.2965.
Connection Type | Universal Electric |
---|---|
Door Style | Utility |
Color | White |
Read about the Utility Inlet Valve Universal Fit 020017
Low-voltage inlets are currently the most common type of valves used with central vacuum systems, mainly on account of their increased practicality and convenience. This central vacuum utility inlet belongs to the same category, so it constitutes a viable option for users of central vacuum systems.
In terms of size, this low-voltage utility inlet is designed to fit elbows and fittings with a standard 2-inch inside diameter. As far as its technical particularities are concerned, it features low-voltage contact points which allow its use with hoses equipped with on/off switch buttons. These are enabled upon the connection of the low-voltage wire to the low-voltage leads on the central vacuum unit. It should also be noted that, similarly to other utility inlet valves, this central vacuum utility inlet is designed to fit into a sweep T fitting, often being mounted in the proximity of the central vacuum unit, more precisely at locations where the pipe is uncovered. Sweep T fittings are commonly encountered in utility rooms, garages, basements and workshops, so these are also the most common locations where low-voltage utility inlet valves can be found.
Finally, this central vacuum utility inlet can also be fitted on PVC pipes as a seal and therefore as a substitute for a proper pipe cap fitting, whether to stop any pipe run extensions or prevent various objects from reaching into the pipe. This additional function only serves to further prove the increased practicality and the high convenience levels this component provides.
ThinkVacuums offers pipe fittings, central vacuum systems, parts, and more. If you need help installing your central vacum call us today: 1.800.322.2965.
Log In
Create New Account